Why You Should Have More Than One SAAB Replacement Key
Keep an extra key handy to help you save time and effort. Especially when your key fob stops working for no apparent reason. The most frequent cause of the key fob being unresponsive is the battery is dead. However, there are other causes as well.
It could cost you around PS1500 to purchase a new car key from a dealer, and the work can take anywhere from 10 to 15 days.
Transponder key
Transponder keys are keys for cars that have an electronic chip inside the key fob. The chips transmit radio signals to communicate with your vehicle's immobilizer. The keys are designed to deter theft by making it difficult for thieves to start the car. Transponder keys assist in locating your stolen car. This is because the immobilizer sends a signal to your car's GPS once the key is put into it.
Most new cars now come with a transponder keys, which is a valuable anti-theft option. Older cars may not come with these features. If your car you own does not have a transponder-key however, you can get one from an auto dealer. A new transponder will typically be much less expensive than a standard "blade key".
You can buy a replacement key via the internet or from an auto dealer. The key will have to be programmed. This can be done by a locksmith or an authorized dealer. The process takes just a few moments and costs less than what you would pay at the dealership. It's essential to have an extra key in case you misplace your original key or in the case of an emergency. If you try to start your car without a key, you could cause damage to the ignition and stop it from working again.
Keys that are wired
If you are a Saab owner you must always have more than one key for your vehicle. It is expensive to add another key, and requires an expert dealer with a tool that is designed for older models, but it is possible to do it for less than $200 when you use the right parts. To get a second key, you will need a replacement case and a new transmitter+transponder, but you can find these for a lot less than the dealer charges.
It is not uncommon for batteries in these remotes to die over time. It is important to change them regularly and it's not a big task to do it. All you require is a flathead screwdriver and a bit of patience. Using the screwdriver, slide it in the slot in the middle of the case. Then, gently open it. When G28CarKeys has been split it is possible to access the electronic components.
The space-bar and shift key both have a copper cable under them that connects the pressure pad to the electronic. The wire inside the key can block the vehicle from recognition. The wire is also used to connect the key to the ignition, so make sure it is removed prior to replacing the key.
Remote key
The 03-11 SAAB 9-3 is one of the most stunning automobiles available, but it can be a bit of a hassle to use. The buttons can become squishy, and the key fob isn't as long-lasting as it should be. You can easily replace the key case.
To do this you'll require a new key and a new case that you can buy at the majority of auto parts stores. You'll also require a flathead screwdriver for removing electronics from the previous case. It's important to be gentle when removing electronics since they can be damaged easily.
After you've removed your electronics, you can make use of a small screwdriver to cut the case open. Be gentle and avoid damaging the plastic. Once you have opened the case, you'll be in a position to see the battery clearly and take it out it easily.
Most used Saabs come with only one key. A second key requires the use of an specialized computer (often called the CIM) in addition to a new key and specialized programming to convince the vehicle that you're not trying to steal the car. Locksmiths are generally not willing to do this because it's too costly. However, you can do it yourself if clever and able to find the right parts at a reasonable cost.
Keyless entry
No matter if your Saab is equipped with an alarm system or doesn't it's a good idea to procure a spare keys. It's simple to duplicate a traditional car key made of metal, but it's more difficult to steal a car using the latest key-fob immobilizer. Old-fashioned metal car keys do not have any security features. Modern keys have security features.
The first thing to do is to remove the emergency key from the case. Make sure you have a screwdriver at the go. After removing the emergency key, use a flathead to split open the case. This will give you full access to the battery, which allows you to replace it.
After the battery replacement is installed and the battery is in place, you can put it back together on the key fob. Don't forget to align the various parts and the limiters, which keep the battery in position. When you're done, can insert the key into the ignition to restart the car. You're now ready to go! This is a great way to save money and keep your vehicle safe from theft. Be sure that your replacement battery is the same type as the original one, and that it has a new label that is compatible with the original. The key will not work properly if it's not the same model as the original.